.svg)
1,071
edits
Rasigan: Difference between revisions
Created page with "{{Use American English|date=July 2020}} File:Still from footage recorded by Edward Turner, 1902. (7996010096).jpg|thumb|300px|Still from test film made by [[Edward Raymond T..."
imported>Diamondchandelier No edit summary |
Flying Bee (talk | contribs) (Created page with "{{Use American English|date=July 2020}} File:Still from footage recorded by Edward Turner, 1902. (7996010096).jpg|thumb|300px|Still from test film made by [[Edward Raymond T...") |
||
| Line 1: | Line 1: | ||
{{Use American English|date=July 2020}} | |||
{{Use | [[File:Still from footage recorded by Edward Turner, 1902. (7996010096).jpg|thumb|300px|Still from test film made by [[Edward Raymond Turner|Edward Turner]] in 1902]] | ||
''' | '''Color motion picture film''' refers both to unexposed [[color photography|color photographic film]] in a format suitable for use in a [[Movie camera|motion picture camera]], and to finished motion picture film, ready for use in a projector, which bears images in color. | ||
== | The first color cinematography was by [[additive color]] systems such as the one patented by [[Edward Raymond Turner]] in 1899 and tested in 1902.<ref>{{cite web|url = https://www.bbc.co.uk/news/uk-england-19598445 |title = Martin Scorsese on world's first colour film discovery|work = BBC News|date = 22 September 2012}}</ref> A simplified additive system was successfully commercialized in 1909 as [[Kinemacolor]]. These early systems used black-and-white film to photograph and project two or more component images through different color [[filter (optics)|filters]]. | ||
During 1920 the first practical [[subtractive color]] processes were introduced. These also used black-and-white film to photograph multiple color-filtered source images, but the final product was a multicolored print that did not require special projection equipment. Before 1932, when three-strip [[Technicolor]] was introduced, commercialized subtractive processes used only two color components and could reproduce only a limited range of color. | |||
In 1935, [[Kodachrome]] was introduced, followed by [[Agfacolor]] in 1936. They were intended primarily for amateur [[home movies]] and "[[Reversal film|slides]]". These were the first films of the "integral tripack" type, coated with three layers of differently color-sensitive [[Photographic emulsion|emulsion]], which is usually what is meant by the words "color film" as commonly used. The few color photographic films still being made in the 2020s are of this type. The first color [[negative (photography)|negative]] films and corresponding [[release print|print]] films were modified versions of these films. They were introduced around 1940 but only came into wide use for commercial motion picture production in the early 1950s. In the US, [[Eastman Kodak]]'s [[Eastmancolor]] was the usual choice, but it was often re-branded with another trade name, such as "WarnerColor", by the studio or the film processor. | |||
Later color films were standardized into two distinct processes: [[Eastman Color Negative|Eastman Color Negative 2]] chemistry (camera negative stocks, duplicating interpositive and internegative stocks) and [[Eastman Color Positive|Eastman Color Positive 2]] chemistry (positive prints for direct projection), usually abbreviated as ECN-2 and ECP-2. Fuji's products are compatible with ECN-2 and ECP-2. | |||
== | Film was the dominant form of cinematography until the 2010s, when it was largely replaced by [[digital cinematography]].<ref name="indiewire">{{cite web|url=http://www.indiewire.com/article/as-studios-abandon-35-mm-film-small-theaters-struggle-to-transition-to-digital|title=Studios Abandon Film, Small Theaters Struggle – And There's a Happy Ending|website=Indiewire|last1=Hurley|first1=Michael|date=2 January 2014|access-date=5 February 2016|archive-url=https://web.archive.org/web/20160201064107/http://www.indiewire.com/article/as-studios-abandon-35-mm-film-small-theaters-struggle-to-transition-to-digital|archive-date=1 February 2016}}</ref> | ||
== | ==Overview== | ||
The first motion pictures were photographed using a simple homogeneous [[photographic emulsion]] that yielded a black-and-white image—that is, an image in shades of gray, ranging from black to white, corresponding to the [[luminous intensity]] of each point on the photographed subject. Light, shade, form and movement were captured, but not color. | |||
The | |||
With color motion picture film, information about the color of the light at each image point is also captured. This is done by analyzing the [[visible spectrum]] of color into several regions (normally three, commonly referred to by their dominant colors: red, green and blue) and recording each region separately. | |||
Current color films do this with three layers of differently color-sensitive photographic emulsion coated on one strip of [[film base]]. Early processes used color [[filter (optics)|filters]] to photograph the color components as completely separate images (e.g., three-strip [[Technicolor]]) or adjacent microscopic image fragments (e.g., [[Dufaycolor]]) in a one-layer black-and-white emulsion. | |||
== | Each photographed color component, initially just a colorless record of the luminous intensities in the part of the spectrum that it captured, is processed to produce a transparent dye image in the color [[complementary color|complementary]] to the color of the light that it recorded. The superimposed dye images combine to synthesize the original colors by the subtractive color method. In some early color processes (e.g., [[Kinemacolor]]), the component images remained in black-and-white form and were projected through color filters to synthesize the original colors by the additive color method. | ||
''The | |||
==Tinting and hand coloring== | |||
{{see also|List of early color feature films}} | |||
The earliest motion picture stocks were [[orthochromatic]], and recorded blue and green light, but not red. Recording all three spectral regions required making film stock [[panchromatic]] to some degree. Since orthochromatic film stock hindered color photography in its beginnings, the first films with color in them used [[aniline]] dyes to create artificial color. Hand-colored films appeared in 1895 with [[Thomas Edison]]'s hand-painted ''Annabelle's Dance'' for his [[Kinetoscope]] viewers. | |||
Many early filmmakers from the first ten years of film also used this method to some degree. [[George Méliès]] offered hand-painted prints of his own films at an additional cost over the black-and-white versions, including the visual-effects pioneering ''[[Le Voyage dans la Lune|A Trip to the Moon]]'' (1902). The film had various parts of the film painted frame-by-frame by twenty-one women in Montreuil<ref name="history">David A. Cook, ''A History of Narrative Film'' (2nd edition, W. W. Norton & Company, 1990). {{ISBN|0-393-95553-2}}</ref> in a production-line method.<ref name="dictionary">Ira Konigsberg, ''The Complete Film Dictionary'' Meridan PAL Books, 1987) {{ISBN|0-452-00980-4}}</ref> | |||
The first commercially successful stencil color process was introduced in 1905 by [[Segundo de Chomón]] working for [[Pathé Frères]]. ''Pathé Color'', renamed [[Pathéchrome]] in 1929, became one of the most accurate and reliable stencil coloring systems. It incorporated an original print of a film with sections cut by [[pantograph]] in the appropriate areas for up to six colors<ref name="history" /> by a coloring machine with dye-soaked, velvet rollers.<ref name="encyclopedia">Ephraim Katz, ''The Film Encyclopedia'' (HarperCollins, 1994) {{ISBN|0-06-273089-4}}</ref> After a stencil had been made for the whole film, it was placed into contact with the print to be colored and run at high speed (60 feet per minute) through the coloring (staining) machine. The process was repeated for each set of stencils corresponding to a different color. By 1910, Pathé had over 400 women employed as stencilers in their [[Vincennes]] factory. Pathéchrome continued production through the 1930s.<ref name="history" /> | |||
A more common technique emerged in the early 1910s known as '''[[film tinting]]''', a process in which either the emulsion or the film base is dyed, giving the image a uniform [[monochromatic]] color. This process was popular during the silent era, with specific colors employed for certain narrative effects (red for scenes with fire or firelight, blue for night, etc.).<ref name="dictionary" /> | |||
A complementary process, called '''toning''', replaces the silver particles in the film with metallic salts or [[mordant]]ed [[dye]]s. This creates a color effect in which the dark parts of the image are replaced with a color (e.g., blue and white rather than black and white). Tinting and toning were sometimes applied together.<ref name="dictionary" /> | |||
In the United States, St. Louis engraver Max Handschiegl and cinematographer Alvin Wyckoff created the [[Handschiegl Color Process]], a dye-transfer equivalent of the stencil process, first used in ''[[Joan the Woman]]'' (1917) directed by [[Cecil B. DeMille]], and used in special effects sequences for films such as ''[[The Phantom of the Opera (1925 film)|The Phantom of the Opera]]'' (1925).<ref name="history" /> | |||
[[Eastman Kodak]] introduced its own system of pre-tinted black-and-white film stocks called [[Sonochrome]] in 1929. The Sonochrome line featured films tinted in seventeen different colors including Peachblow, Inferno, Candle Flame, Sunshine, Purple Haze, Firelight, Azure, Nocturne, Verdante, Aquagreen,<ref name="readfilm" /> Caprice, Fleur de Lis, Rose Doree, and the neutral-density Argent, which kept the screen from becoming excessively bright when switching to a black-and-white scene.<ref name="history" /> | |||
Tinting and toning continued to be used well into the sound era. In the 1930s and 1940s, some western films were processed in a sepia-toning solution to evoke the feeling of old photographs of the day. Tinting was used as late as 1951 for [[Sam Newfield]]'s sci-fi film ''[[Lost Continent (1951 film)|Lost Continent]]'' for the green lost-world sequences. [[Alfred Hitchcock]] used a form of hand-coloring for the orange-red gun-blast at the audience in ''[[Spellbound (1945 film)|Spellbound]]'' (1945).<ref name="history" /> Kodak's Sonochrome and similar pre-tinted stocks were still in production until the 1970s and were used commonly for custom theatrical trailers and [[Snipe (theatrical)|snipes]]. | |||
In the last half of the 20th century, [[Norman McLaren]], who was one of the pioneers in animated movies, made several animated films in which he directly hand-painted the images, and in some cases, also the soundtrack, on each frame of the film. This approach was previously employed in the early years of movies, late 19th and early 20th century. One of the precursors in color hand painting frame by frame were the Aragonese [[Segundo de Chomón]] and his French wife [[Julienne Mathieu]], who were Melies' close competitors. | |||
Tinting was gradually replaced by natural color techniques. | |||
==Physics of light and color== | |||
The principles on which color photography is based were first proposed by Scottish physicist [[James Clerk Maxwell]] in 1855 and presented at the [[Royal Society]] in London in 1861.<ref name="history" /> By that time, it was known that light comprises a spectrum of different wavelengths that are perceived as different colors as they are absorbed and reflected by natural objects. Maxwell discovered that all natural colors in this spectrum as perceived by the human eye may be reproduced with additive combinations of three primary colors—red, green, and blue—which, when mixed equally, produce white light.<ref name="history" /> | |||
Between 1900 and 1935, dozens of natural color systems were introduced, although only a few were successful.<ref name="readfilm">Monaco, James (1981) (Revised ed) ''How to Read a Film'' Oxford University Press. {{ISBN|0-19-502806-6}}.</ref> | |||
===Additive color=== | |||
The first color systems that appeared in motion pictures were additive color systems. Additive color was practical because no special color stock was necessary. Black-and-white film could be processed and used in both filming and projection. The various additive systems entailed the use of color [[filter (photography)|filters]] on both the movie camera and projector. Additive color adds lights of the primary colors in various proportions to the projected image. Because of the limited amount of space to record images on film, and later because the lack of a camera that could record more than two strips of film at once, most early motion-picture color systems consisted of two colors, often red and green or red and blue.<ref name="dictionary" /> | |||
A pioneering three-color additive system was patented in England by [[Edward Raymond Turner]] in 1899.<ref>{{cite news|title=World's first colour moving pictures discovered|url=https://www.bbc.co.uk/news/uk-england-19423951l|newspaper= BBC News|date=12 September 2012}}</ref> It used a rotating set of red, green and blue filters to photograph the three color components one after the other on three successive [[film frame|frame]]s of [[panchromatic]] black-and-white film. The finished film was projected through similar filters to reconstitute the color. In 1902, Turner shot test footage to demonstrate his system, but projecting it proved problematic because of the accurate registration (alignment) of the three separate color elements required for acceptable results. Turner died a year later without having satisfactorily projected the footage. In 2012, curators at the [[National Media Museum]] in Bradford, UK, had the original custom-format [[nitrate film]] copied to black-and-white 35 mm film, which was then scanned into a digital video format by [[telecine]]. Finally, [[digital image processing]] was used to align and combine each group of three frames into one color image.<ref>[http://www.brianpritchard.com/Lee_Turner_Project.htm Pritchard, B. (2012). "Lee-Turner Project with the National Media Museum".] Retrieved 20 April 2013.</ref> As a result, these films from 1902 became viewable in full color.<ref>{{cite news|title=World's first colour film unveiled|first = Anita |last = Singh|url =https://www.telegraph.co.uk/culture/film/film-news/9538882/Worlds-first-colour-film-unveiled.html |newspaper= The Telegraph|date=12 September 2012}}</ref> | |||
[[File:A Visit to the Seaside (1908).webm|thumb|''A Visit to the Seaside'', the first motion picture in Kinemacolor]] | |||
[[File:The Delhi Durbar 1911.webm|thumb|''With Our King and Queen Through India'', extract]] | |||
Practical color in the motion picture business began with [[Kinemacolor]], first demonstrated in 1906.<ref name="encyclopedia" /> This was a two-color system created in England by [[George Albert Smith (inventor)|George Albert Smith]], and promoted by film pioneer [[Charles Urban]]'s The Charles Urban Trading Company in 1908. It was used for a series of films including the documentary ''[[With Our King and Queen Through India]]'', depicting the [[Delhi Durbar]] (also known as ''The Durbar at Delhi'', 1912), which was filmed in December 1911. The Kinemacolor process consisted of alternating frames of specially sensitized black-and-white film exposed at 32 frames per second through a rotating filter with alternating red and green areas. The printed film was projected through similar alternating red and green filters at the same speed. A perceived range of colors resulted from the blending of the separate red and green alternating images by the viewer's persistence of vision.<ref name="dictionary" /><ref>(1917) "Kinemacolor" ''How to Make and Operate Moving Pictures'' Funk & Wagnalls. Courtesy of [http://www.widescreenmuseum.com Wide Screen Museum]</ref> | |||
[[William Friese-Greene]] invented another additive color system called Biocolour, which was developed by his son [[Claude Friese-Greene]] after William's death in 1921. William sued George Albert Smith, alleging that the Kinemacolor process infringed on the patents for his Bioschemes, Ltd.; as a result, Smith's patent was revoked in 1914.<ref name="history" /> Both Kinemacolor and Biocolour had problems with "fringing" or "haloing" of the image, due to the separate red and green images not fully matching up.<ref name="history" /> | |||
By their nature, these additive systems were very wasteful of light. Absorption by the color filters involved meant that only a minor fraction of the projection light actually reached the screen, resulting in an image that was dimmer than a typical black-and-white image. The larger the screen, the dimmer the picture. For this and other case-by-case reasons, the use of additive processes for theatrical motion pictures had been almost completely abandoned by the early 1940s, though additive color methods are employed by all the color [[video]] and computer display systems in common use today.<ref name="dictionary" /> | |||
===Subtractive color=== | |||
The first practical [[subtractive color]] process was introduced by Kodak as "Kodachrome", a name recycled twenty years later for a very different and far better-known product. Filter-photographed red and blue-green records were printed onto the front and back of one strip of black-and-white [[duplitized film]]. After development, the resulting silver images were bleached away and replaced with color dyes, red on one side and cyan on the other. The pairs of superimposed dye images reproduced a useful but limited range of color. Kodak's first narrative film with the process was a short subject entitled ''Concerning $1000'' (1916). Though their duplitized film provided the basis for several commercialized two-color printing processes, the image origination and color-toning methods constituting Kodak's own process were little-used. | |||
The first truly successful subtractive color process was William van Doren Kelley's [[Prizma]],<ref name="afipriz">Slide, Anthony. (1990) "Prizma Color" ''The American Film Industry: A Historical Dictionary'' Limelight p. 271. {{ISBN|0-87910-139-3}}</ref> an early color process that was first introduced at the [[American Museum of Natural History]] in New York City on 8 February 1917.<ref>[https://books.google.com/books?id=Ra0eAQAAIAAJ&pg=PA150#v=onepage Museum Notes], ''The American Museum Journal'' (1917), vol. 17, p. 150.</ref><ref>Cornwell-Clyne, Adrian. (1951) ''Colour Cinematography'' Chapman and Hall press.</ref> Prizma began in 1916 as an additive system similar to Kinemacolor. | |||
However, after 1917, Kelley reinvented the process as a subtractive one with several years of short films and travelogues, such as ''Everywhere With Prizma'' (1919) and ''A Prizma Color Visit to Catalina'' (1919) before releasing features such as the documentary ''Bali the Unknown'' (1921), ''[[The Glorious Adventure (1922 film)|The Glorious Adventure]]'' (1922), and ''[[Venus of the South Seas]]'' (1924). A Prizma promotional short filmed for [[Del Monte Foods]] titled ''Sunshine Gatherers'' (1921) is available on DVD in Treasures 5 The West 1898–1938 by the National Film Preservation Foundation. | |||
The invention of Prizma led to a series of similarly printed color processes. This [[bipack color]] system used two strips of film running through the camera, one recording red, and one recording blue-green light. With the black-and-white negatives being printed onto duplitized film, the color images were then toned red and blue, effectively creating a subtractive color print. | |||
[[Leon Forrest Douglass]] (1869–1940), a founder of [[Victor Records]], developed a system he called Naturalcolor, and first showed a short test film made in the process on 15 May 1917 at his home in [[San Rafael, California]]. The only feature film known to have been made in this process, ''[[Cupid Angling]]'' (1918) — starring [[Ruth Roland]] and with cameo appearances by [[Mary Pickford]] and [[Douglas Fairbanks]] — was filmed in the Lake Lagunitas area of [[Marin County, California]].<ref>Gracyk, Tim. ''[http://www.gracyk.com/leon.shtml Leon F. Douglass: Inventor and Victor's First Vice-President]'' (Retrieved on 2007-03-26)</ref> | |||
After experimenting with additive systems (including a [[movie camera|camera]] with two [[apertures]], one with a red filter, one with a green filter) from 1915 to 1921, Dr. [[Herbert Kalmus]], Dr. Daniel Comstock, and mechanic W. Burton Wescott developed a subtractive color system for [[Technicolor]]. The system used a [[beam splitter]] in a specially modified camera to send red and green light to adjacent frames of one strip of black-and-white film. From this negative, skip-printing was used to print each color's frames contiguously onto film stock with half the normal base thickness. The two prints were chemically toned to roughly complementary hues of red and green,<ref name="encyclopedia" /> then cemented together, back to back, into a single strip of film. The first film to use this process was ''[[The Toll of the Sea]]'' ([[1922 in film|1922]]) starring [[Anna May Wong]]. Perhaps the most ambitious film to use it was ''[[The Black Pirate]]'' ([[1926 in film|1926]]), starring and produced by [[Douglas Fairbanks]]. | |||
The process was later refined through the incorporation of dye [[imbibition]], which allowed for the transferring of dyes from both color matrices into a single print, avoiding several problems that had become evident with the cemented prints and allowing multiple prints to be created from a single pair of matrices.<ref name="dictionary" /> | |||
Technicolor's early system were in use for several years, but it was a very expensive process: shooting cost three times that of black-and-white photography and printing costs were no cheaper. By 1932, color photography in general had nearly been abandoned by major studios, until Technicolor developed a new advancement to record all three primary colors. Utilizing a special [[dichroic]] [[beam splitter]] equipped with two 45-degree [[prism (optics)|prism]]s in the form of a cube, light from the lens was deflected by the prisms and split into two paths to expose each one of three black-and-white negatives (one each to record the densities for red, green, and blue).<ref name="afitech">Slide, Anthony. (1990) "Technicolor" ''The American Film Industry: A Historical Dictionary'' Limelight pp. 338–340. {{ISBN|0-87910-139-3}}</ref> | |||
The three negatives were then printed to gelatin matrices, which also completely bleached the image, washing out the silver and leaving only the gelatin record of the image. A receiver print, consisting of a 50% density print of the black-and-white negative for the green record strip, and including the soundtrack, was struck and treated with dye mordants to aid in the imbibition process (this "black" layer was discontinued in the early 1940s). The matrices for each strip were coated with their complementary dye (yellow, cyan, or magenta), and then each successively brought into high-pressure contact with the receiver, which imbibed and held the dyes, which collectively rendered a wider spectrum of color than previous technologies.<ref name="awsm">Hart, Martin (2003). "[http://www.widescreenmuseum.com/oldcolor/technicolor6.htm The History of Technicolor]" Widescreenmuseum.com. Retrieved 2006-07-07.</ref> The first animation film with the three-color (also called three-strip) system was [[Walt Disney]]'s ''[[Flowers and Trees]]'' ([[1932 in film|1932]]), the first short live-action film was ''La Cucaracha'' ([[1934 in film|1934]]), and the first feature was ''[[Becky Sharp (film)|Becky Sharp]]'' ([[1935 in film|1935]]).<ref name="encyclopedia" /> | |||
[[Gasparcolor]], a single-strip 3-color system, was developed in 1933 by the Hungarian chemist Dr. Bela Gaspar.<ref>{{cite web|url=http://www.oskarfischinger.org/GasparColor.htm|title=Gasparcolor: Perfect Hues for Animation|publisher=Fischinger Archive}}</ref> | |||
The real push for color films and the nearly immediate changeover from black-and-white production to nearly all color film were pushed forward by the prevalence of television in the early 1950s. In 1947, only 12 percent of American films were made in color. By 1954, that number rose to over 50 percent.<ref name="history" /> The rise in color films was also aided by the breakup of Technicolor's near monopoly on the medium. | |||
In 1947, the United States Justice Department filed an antitrust suit against Technicolor for monopolization of color cinematography (even though rival processes such as [[Cinecolor]] and [[Trucolor]] were in general use). In 1950, a federal court ordered Technicolor to allot a number of its three-strip cameras for use by independent studios and filmmakers. Although this certainly affected Technicolor, its real undoing was the invention of [[Eastmancolor]] that same year.<ref name="history" /> | |||
==Monopack color film== | |||
[[Image:35mm-undevel.jpg|left|thumb|150px|A strip of undeveloped 35 mm color negative.]] | |||
In the field of motion pictures, the many-layered type of color film normally called an ''integral tripack'' in broader contexts has long been known by the less tongue-twisting term ''monopack''. For many years, Monopack (capitalized) was a proprietary product of Technicolor Corp, whereas monopack (not capitalized) generically referred to any of several single-strip color film products, including various Eastman Kodak products. It appeared that Technicolor made no attempt to register Monopack as a trademark with the [[US Patent and Trademark Office]], although it asserted that term as if it were a registered trademark, and it had the force of a legal agreement between it and Eastman Kodak to back up that assertion. It was a solely-sourced product, too, as Eastman Kodak was legally prevented from marketing any color motion picture film products wider than 16mm, 35mm specifically, until the expiration of the so-called "Monopack Agreement" in 1950. This, notwithstanding the facts that Technicolor never had the capability to manufacture sensitized motion picture films of any kind, nor single-strip color films based upon its so-called "Troland Patent" (which Technicolor maintained covered all monopack-type films in general, and which Eastman Kodak elected not to contest as Technicolor was then one of its largest customers, if not its largest customer). After 1950, Eastman Kodak was free to make and market color films of any kind, particularly including monopack color motion picture films in 65/70mm, 35mm, 16mm and 8mm. The "Monopack Agreement" had no effect on color still films. | |||
Monopack color films are based on the subtractive color system, which filters colors from white light by using superimposed cyan, magenta and yellow dye images. Those images are created from records of the amounts of red, green and blue light present at each point of the image formed by the camera lens. A subtractive primary color (cyan, magenta, yellow) is what remains when one of the additive primary colors (red, green, blue) has been removed from the spectrum. Eastman Kodak's monopack color films incorporated three separate layers of differently color sensitive emulsion into one strip of film. Each layer recorded one of the additive primaries and was processed to produce a dye image in the [[complementary color|complementary]] subtractive primary. | |||
[[Kodachrome]] was the first commercially successful application of monopack multilayer film, introduced in 1935.<ref name="explore">''Exploring the Color Image'' (1996) Eastman Kodak Publication H-188.</ref> For professional motion picture photography, Kodachrome Commercial, on a 35mm [[Film perforations#BH|BH-perforated]] base, was available exclusively from Technicolor, as its so-called "Technicolor Monopack" product. Similarly, for sub-professional motion picture photography, Kodachrome Commercial, on a 16mm base, was available exclusively from Eastman Kodak. In both cases, Eastman Kodak was the sole manufacturer and the sole processor. In the 35mm case, Technicolor [[Dye-transfer process|dye-transfer]] printing was a "tie-in" product.<ref>The tie-in ensures the quality of the tied-good when the tied good (dye-transfer printing, in this case) is used in conjunction with the tying good (Three-Strip or Monopack origination, in this case), paraphrasing ''Tie-in Sales and Price Discrimination'', S. J. Liebowitz, University of Texas at Dallas.</ref> In the 16mm case, there were Eastman Kodak duplicating and printing stocks and associated chemistry, not the same as a "tie-in" product. In exceptional cases, Technicolor offered 16mm dye-transfer printing, but this necessitated the exceptionally wasteful process of printing on a 35mm base, only thereafter to be re-perforated and re-slit to 16mm, thereby discarding slightly more than one-half of the end product. | |||
A late modification to the "Monopack Agreement", the "Imbibition Agreement", finally allowed Technicolor to economically manufacture 16mm dye-transfer prints as so-called "double-rank" 35/32mm prints (two 16mm prints on a 35mm base that was originally perforated at the 16mm specification for both halves, and was later re-slit into two 16mm wide prints without the need for re-perforation). This modification also facilitated the early experiments by Eastman Kodak with its negative-positive monopack film, which eventually became Eastmancolor. Essentially, the "Imbibition Agreement" lifted a portion of the "Monopack Agreement's" restrictions on Technicolor (which prevented it from making motion picture products less than 35mm wide) and somewhat related restrictions on Eastman Kodak (which prevented it from experimenting and developing monopack products greater than 16mm wide). | |||
[[Eastmancolor]], introduced in 1950,<ref name="motion.kodak.com">[http://motion.kodak.com/US/en/motion/Products/Chronology_Of_Film/chrono2.htm Chronology of Motion Picture Films: 1940–1959] {{webarchive|url=https://web.archive.org/web/20090625062139/http://motion.kodak.com/US/en/motion/Products/Chronology_Of_Film/chrono2.htm |date=2009-06-25 }}, Kodak.</ref> was Kodak's first economical, single-strip [[35mm movie film|35 mm]] negative-positive process incorporated into one strip of film. This eventually rendered Three-Strip color photography obsolete, even though, for the first few years of Eastmancolor, Technicolor continued to offer Three-Strip origination combined with dye-transfer printing (150 titles produced in 1953, 100 titles produced in 1954 and 50 titles produced in 1955, the last year for Three-Strip as camera negative stock). The first commercial feature film to use Eastmancolor was the documentary ''[[Royal Journey]]'', released in December 1951.<ref name="motion.kodak.com"/> Hollywood studios waited until an improved version of Eastmancolor negative came out in 1952 before using it; ''[[This is Cinerama]]'' was an early film which employed three separate and interlocked strips of Eastmancolor negative. ''This is Cinerama'' was initially printed on Eastmancolor positive, but its significant success eventually resulted in it being reprinted by Technicolor, using dye-transfer. | |||
By 1953, and especially with the introduction of anamorphic wide screen [[Cinemascope|CinemaScope]], Eastmancolor became a marketing imperative as CinemaScope was incompatible with Technicolor's Three-Strip camera and lenses. Indeed, Technicolor Corp became one of the best, if not the best, processor of Eastmancolor negative, especially for so-called "wide gauge" negatives (5-perf 65mm, 8- and 6-perf 35mm), yet it far preferred its own 35mm dye-transfer printing process for Eastmancolor-originated films with a print run that exceeded 500 prints,<ref>At one point, Technicolor implemented a two-tiered print pricing structure, one for dye-transfer prints, which favored large volume printing, and one Eastmancolor prints, which favored small volume printing—but this was after the "tie-in" between origination and printing had been broken by the abandonment of Three-Strip and Monopack origination. For small print runs, dye-transfer remained an option, but at a significantly higher cost.</ref> not withstanding the significant "loss of register" that occurred in such prints that were expanded by CinemaScope's 2X horizontal factor, and, to a lesser extent, with so-called "flat wide screen" (variously 1.66:1 or 1.85:1, but spherical and not anamorphic). This nearly fatal flaw was not corrected until 1955 and caused numerous features initially printed by Technicolor to be scrapped and reprinted by [[Deluxe Entertainment Services Group|DeLuxe Labs]]. (These features are often billed as "Color by Technicolor-DeLuxe".) Indeed, some Eastmancolor-originated films billed as "Color by Technicolor" were never actually printed using the dye-transfer process, due in part to the throughput limitations of Technicolor's dye-transfer printing process, and competitor DeLuxe's superior throughput. Incredibly, DeLuxe once had a license to install a Technicolor-type dye-transfer printing line, but as the "loss of register" problems became apparent in Fox's CinemaScope features that were printed by Technicolor, after Fox had become an all-CinemaScope producer, Fox-owned DeLuxe Labs abandoned its plans for dye-transfer printing and became, and remained, an all-Eastmancolor shop, as Technicolor itself later became. | |||
Technicolor continued to offer its proprietary imbibition dye-transfer printing process for projection prints until 1975, and even briefly revived it in 1998. As an archival format, Technicolor prints are one of the most stable color print processes yet created, and prints properly cared for are estimated to retain their color for centuries.<ref name= "wilhelm">{{cite book|last1= Wilhelm|first1=Henry |last2= Brower|first2= Carol|date =1993|title= The Permanence and Care of Color Photographs|publisher= Preservation Publishing Company|url = http://www.wilhelm-research.com/pdf/HW_Book_10_of_20_HiRes_v1a.pdf |chapter =The Extraordinarily Stable Technicolor Dye Imbibition Motion Picture Color Print Process|pages= 345–366|archiveurl=https://web.archive.org/web/20060619051550/http://www.wilhelm-research.com/pdf/HW_Book_10_of_20_HiRes_v1a.pdf |archivedate=2006-06-19 }}</ref> With the introduction of Eastmancolor low-fade positive print (LPP) films, properly stored (at 45 °F or 7 °C and 25 percent relative humidity) monopack color film is expected to last, with no fading, a comparative amount of time. Improperly stored monopack color film from before 1983 can incur a 30 percent image loss in as little as 25 years.<ref>Holben, Jay (June 1999). "Preserving Negatives for the Next Generation" ''American Cinematographer Magazine'' ASC Press. pp. 147–152.</ref> | |||
==Functionality== | |||
[[Image:Color film.jpg|right|thumb|200px|A representation of the layers within a piece of developed color 35 mm negative film. When developed, the dye couplers in the blue-, green-, and red-sensitive layers turn the exposed silver halide crystals to their complementary colors (yellow, magenta, and cyan). The film is made up of (A) Clear protective topcoat, (B) UV filter, (C) "Fast" blue layer, (D) "Slow" blue layer, (E) Yellow filter to cut all blue light from passing through to (F) "Fast" green layer, (G) "Slow" green layer, (H) Inter (subbing) layer, (I) "Fast" red layer, (J) "Slow" red layer, (K) Clear triacetate base, and (L) Antihalation (rem-jet) backing.]] | |||
A color film is made up of many different layers that work together to create the color image. Color negative films provide three main color layers: the blue record, green record, and red record; each made up of two separate layers containing silver halide crystals and dye-couplers. A cross-sectional representation of a piece of developed color negative film is shown in the figure at the right. Each layer of the film is so thin that the composite of all layers, in addition to the triacetate base and antihalation backing, is less than 0.0003" (8 µm) thick.<ref name="hone">''Kodak Motion Picture Film (H1)'' (4th ed). Eastman Kodak Company. {{ISBN|0-87985-477-4}}</ref> | |||
The three color records are stacked as shown at right, with a UV filter on top to keep the non-visible ultraviolet radiation from exposing the silver-halide crystals, which are naturally sensitive to UV light. Next are the fast and slow blue-sensitive layers, which, when developed, form the latent image. When the exposed silver-halide crystal is developed, it is coupled with a dye grain of its complementary color. This forms a dye "cloud" (like a drop of water on a paper towel) and is limited in its growth by development-inhibitor-releasing (DIR) couplers, which also serve to refine the sharpness of the processed image by limiting the size of the dye clouds. The dye clouds formed in the blue layer are actually yellow (the opposite or complementary color to blue).<ref name="stockone">Holben, Jay. (April 2000). "Taking Stock" Part 1 of 2. ''American Cinematographer Magazine'' ASC Press. pp. 118–130</ref> There are two layers to each color; a "fast" and a "slow." The fast layer features larger grains that are more sensitive to light than the slow layer, which has finer grain and is less sensitive to light. Silver-halide crystals are naturally sensitive to blue light, so the blue layers are on the top of the film and they are followed immediately by a yellow filter, which stops any more blue light from passing through to the green and red layers and biasing those crystals with extra blue exposure. Next are the red-sensitive record (which forms cyan dyes when developed); and, at the bottom, the green-sensitive record, which forms magenta dyes when developed. Each color is separated by a gelatin layer that prevents silver development in one record from causing unwanted dye formation in another. On the back of the [[film base]] is an anti-halation layer that absorbs light which would otherwise be weakly reflected back through the film by that surface and create halos of light around bright features in the image. In color film, this backing is "rem-jet", a black-pigmented, non-gelatin layer which is removed in the developing process.<ref name="hone" /> | |||
Eastman Kodak manufactures film in 54-inch (1,372 mm) wide rolls. These rolls are then slit into various sizes (70 mm, 65 mm, 35 mm, 16 mm) as needed. | |||
==Manufacturers of color film for motion picture use== | |||
{{see also|List of motion picture film stocks}} | |||
Motion picture film, primarily because of the rem-jet backing, requires different processing than standard [[C-41 process]] color film. The process necessary is ECN-2, which has an initial step using an alkaline bath to remove the backing layer. There are also minor differences in the remainder of the process. If motion picture negative is run through a standard C-41 color film developer bath, the rem-jet backing partially dissolves and destroys the integrity of the developer and, potentially, ruins the film. | |||
===Kodak color motion picture films=== | |||
In the late 1980s, Kodak introduced the [[Tabular-grain film|T-Grain]] emulsion, a technological advancement in the shape and make-up of silver halide grains in their films. T-Grain is a tabular silver halide grain that allows for greater overall surface area, resulting in greater light sensitivity with a relatively small grain and a more uniform shape that results in a less overall graininess to the film. This made for sharper and more sensitive films. The T-Grain technology was first employed in Kodak's EXR line of motion picture color negative stocks.<ref name="stocktwo">Probst, Christopher. (May 2000). "Taking Stock" Part 2 of 2 ''American Cinematographer Magazine'' ASC Press. pp. 110–120</ref> This was further refined in 1996 with the Vision line of emulsions, followed by Vision2 in the early 2000s and Vision3 in 2007. | |||
===Fuji color motion picture films=== | |||
Fuji films also integrate tabular grains in their SUFG (Super Unified Fine Grain) films. In their case, the SUFG grain is not only tabular, it is hexagonal and consistent in shape throughout the emulsion layers. Like the T-grain, it has a larger surface area in a smaller grain (about one-third the size of traditional grain) for the same light sensitivity. In 2005, Fuji unveiled their Eterna 500T stock, the first in a new line of advanced emulsions, with Super Nano-structure Σ Grain Technology. | |||
==See also== | |||
* {{Portal-inline|Film}} | |||
* [[135 film]] | |||
* [[35mm movie film|35mm film]] | |||
* [[Cinecolor]] | |||
* [[Color photography]] | |||
* [[Film base]] | |||
* [[Film stock]] | |||
* [[Kinemacolor]] | |||
* [[List of color film systems]] | |||
* [[List of early color feature films]] | |||
* [[List of film formats]] | |||
* [[List of motion picture film stocks]] | |||
* [[Multicolor]] | |||
* [[Photographic film]] mainly about film for stills | |||
* [[Prizma]] | |||
* [[Technicolor]] | |||
==References== | ==References== | ||
{{reflist}} | {{reflist}} | ||
==Further reading== | |||
* John Waner, ''Hollywood's Conversion of All Production to Color'', Tobey Publishing, 2000. | |||
==External links== | ==External links== | ||
* | * [http://zauberklang.ch/filmcolors/ Timeline of Historical Film Colors] | ||
* {{ | * [https://www.bbc.co.uk/news/uk-england-19423951 BBC article on the first color film] | ||
{{ | * The [[American Widescreen Museum]] has a thorough treatise on [http://www.widescreenmuseum.com/oldcolor/index.htm early motion picture color processes]. | ||
* [https://www.imdb.com/company/co0002739 List of films in Prizma at IMDb] | |||
* "[https://books.google.com/books?id=NzW1zWsl-2cC&pg=RA1-PA297 Animation in Natural Colours]", ''Moving Pictures'', 1912. | |||
{{Film genres}} | |||
{{Authority control}} | |||
[[Category: | [[Category:Film and video technology]] | ||
[[Category: | [[Category:Photographic film types]] | ||
[[Category: | [[Category:History of film]] | ||
[[Category: | [[Category:Color|Film]] | ||
[[Category: | [[Category:Articles containing video clips]] | ||