Ilmenite

From Bharatpedia, an open encyclopedia


Ilmenite
Ilmenite-155036.jpg
Ilmenite from Miass, Ilmen Mts, Chelyabinsk Oblast', Southern Urals, Urals Region, Russia. 4.5 x 4.3 x 1.5 cm
General
CategoryOxide mineral
Formula
(repeating unit)
iron titanium oxide, Template:Chem
IMA symbolIlm[1]
Strunz classification4.CB.05
Dana classification04.03.05.01
Crystal systemTrigonal
Crystal classRhombohedral (Template:Overline)
H-M symbol: (Template:Overline)
Space groupRTemplate:Overline (no. 148)
Unit cella = 5.08854(7)
c = 14.0924(3) [Å]: Z = 6
Identification
ColorIron-black; gray with a brownish tint in reflected light
Crystal habitGranular to massive and lamellar exsolutions in hematite or magnetite
Twinning{0001} simple, {10Template:Overline1} lamellar
Cleavageabsent; parting on {0001} and {10Template:Overline1}
FractureConchoidal to subconchoidal
TenacityBrittle
Mohs scale hardness5–6
LusterMetallic to submetallic
StreakBlack
DiaphaneityOpaque
Specific gravity4.70–4.79
Optical propertiesUniaxial (–)
BirefringenceStrong; O = pinkish brown, E = dark brown (bireflectance)
Other characteristicsweakly magnetic
References[2][3][4]

Ilmenite is a titanium-iron oxide mineral with the idealized formula Template:Chem. It is a weakly magnetic black or steel-gray solid. Ilmenite is the most important ore of titanium[5] and the main source of titanium dioxide, which is used in paints, printing inks,[6] fabrics, plastics, paper, sunscreen, food and cosmetics.[7]

Structure and properties[edit]

Ilmenite is a heavy (specific gravity 4.7), moderately hard (Mohs hardness 5.6 to 6), opaque black mineral with a submetallic luster.[8] It is almost always massive, with thick tabular crystals being quite rare. It shows no discernible cleavage, breaking instead with a conchoidal to uneven fracture.[9]

Ilmenite crystallizes in the trigonal system with space group RTemplate:Overline.[10][3] The ilmenite crystal structure consists of an ordered derivative of the corundum structure; in corundum all cations are identical but in ilmenite Fe2+ and Ti4+ ions occupy alternating layers perpendicular to the trigonal c axis.

Pure ilmenite is paramagnetic (showing only very weak attraction to a magnet), but ilmenite forms solid solutions with hematite that are weakly ferromagnetic and so are noticeably attracted to a magnet. Natural deposits of ilmenite usually contain intergrown or exsolved magnetite that also contribute to its ferromagnetism.[8]

Ilmenite is distinguished from hematite by its less intensely black color and duller appearance and its black streak, and from magnetite by its weaker magnetism.[9][8]


Discovery[edit]

In 1791 William Gregor discovered a deposit of black sand in a stream that runs through the valley just south of the village of Manaccan (Cornwall), and identified for the first time titanium as one of the constituents of the main mineral in the sand.[11][12][13] Gregor named this mineral manaccanite.[14] The same mineral was found in the Ilmensky Mountains, near Miass, Russia, and named ilmenite.[9]

Mineral chemistry[edit]

Pure ilmenite has the composition FeTiO
3
. However, ilmenite most often contains appreciable quantities of magnesium and manganese and up to 6 wt% of hematite, Fe
2
O
3
, substituting for FeTiO
3
in the crystal structure. Thus the full chemical formula can be expressed as (Fe,Mg,Mn,Ti)O
3
.[8] Ilmenite forms a solid solution with geikielite (Template:Chem) and pyrophanite (Template:Chem) which are magnesian and manganiferous end-members of the solid solution series.[3]

Although ilmenite is typically close to the ideal Template:Chem composition, with minor mole percentages of Mn and Mg,[3] the ilmenites of kimberlites usually contain substantial amounts of geikielite molecules,[15] and in some highly differentiated felsic rocks ilmenites may contain significant amounts of pyrophanite molecules.[16]

At temperatures above 950 °C (1,740 °F), there is a complete solid solution between ilmenite and hematite. There is a miscibility gap at lower temperatures, resulting in a coexistence of these two minerals in rocks but no solid solution.[8] This coexistence may result in exsolution lamellae in cooled ilmenites with more iron in the system than can be homogeneously accommodated in the crystal lattice.[17] Ilmenite containing 6 to 13 percent Fe
2
O
3
is sometimes described as ferrian ilmenite.[18][19]

Ilmenite alters or weathers to form the pseudo-mineral leucoxene, a fine-grained yellowish to grayish or brownish material[8][20] enriched to 70% or more of TiO
2
.[19] Leucoxene is an important source of titanium in heavy mineral sands ore deposits.[21]

Paragenesis[edit]

Ilmenite is a common accessory mineral found in metamorphic and igneous rocks.[3] It is found in large concentrations in layered intrusions where it forms as part of a cumulate layer within the intrusion. Ilmenite generally occurs in these cumulates together with orthopyroxene[22] or in combination with plagioclase and apatite (nelsonite).[23]

Magnesian ilmenite is formed in kimberlites as part of the MARID association of minerals (mica-amphibole-rutile-ilmenite-diopside) assemblage of glimmerite xenoliths.[24] Manganiferous ilmenite is found in granitic rocks[16] and also in carbonatite intrusions where it may also contain anomalously high amounts of niobium.[25]

Many mafic igneous rocks contain grains of intergrown magnetite and ilmenite, formed by the oxidation of ulvospinel.[26]

Processing and consumption[edit]

Tellnes opencast ilmenite mine, Sokndal, Norway

Most ilmenite is mined for titanium dioxide production.[27] Ilmenite and titanium dioxide are used in the production of titanium metal.[28][29]

Titanium dioxide is most used as a white pigment and the major consuming industries for TiO2 pigments are paints and surface coatings, plastics, and paper and paperboard. Per capita consumption of TiO2 in China is about 1.1 kilograms per year, compared with 2.7 kilograms for Western Europe and the United States.[30]

Ilmenite can be converted into pigment grade titanium dioxide via either the sulfate process or the chloride process.[31] Ilmenite can also be improved and purified to titanium dioxide in the form of rutile using the Becher process.[32]

Ilmenite ores can also be converted to liquid iron and a titanium-rich slag using a smelting process.[33]

Ilmenite ore is used as a flux by steelmakers to line blast furnace hearth refractory.[34]

Ilmenite can be used to produce ferrotitanium via an aluminothermic reduction.[35]

Feedstock production[edit]

Various ilmenite feedstock grades.[36]
Feedstock Template:Chem Content Process
(%)
Ore <55 Sulfate
Ore >55 Chloride
Ore <50 Smelting (slag)
Synthetic rutile 88-95 Chloride
Chloride slag 85-95 Chloride
Sulfate slag 80 Sulfate
Estimated contained Template:Chem.
production[37][38]
(Metric tpa x 1,000,
ilmenite & rutile)
Year 2011 2012-13
Country USGS Projected
Australia 1,300 247
South Africa 1,161 190
Mozambique 516 250
Canada 700
India 574
China 500
Vietnam 490
Ukraine 357
Senegal - 330
Norway 300
United States 300
Madagascar 288
Kenya - 246
Sri Lanka 62
Sierra Leone 60
Brazil 48
Other countries 37
Total world ~6,700 ~1,250

Most ilmenite is recovered from heavy mineral sands ore deposits, where the mineral is concentrated as a placer deposit and weathering reduces its iron content, increasing the percentage of titanium. However, ilmenite can also be recovered from "hard rock" titanium ore sources, such as ultramafic to mafic layered intrusions or anorthosite massifs. The ilmenite in layered intrusions is sometimes abundant, but it contains considerable intergrowths of magnetite that reduce its ore grade. Ilmenite from anorthosite massifs often contain large amounts of calcium or magnesium that render it unsuitable for the chloride process.[39]

The proven reserves of ilmenite and rutile ore are estimated at between 423 and 600 million tonnes titanium dioxide. The largest ilmenite deposits are in South Africa, India, the United States, Canada, Norway, Australia, Ukraine, Russia and Kazakhstan. Additional deposits are found in Bangladesh, Chile, Mexico and New Zealand.[40]

Australia was the world's largest ilmenite ore producer in 2011, with about 1.3 million tonnes of production, followed by South Africa, Canada, Mozambique, India, China, Vietnam, Ukraine, Norway, Madagascar and United States.

The top four ilmenite and rutile feedstock producers in 2010 were Rio Tinto Group, Iluka Resources, Exxaro and Kenmare Resources, which collectively accounted for more than 60% of world's supplies.[41]

The world's two largest open cast ilmenite mines are:

Major mineral sands based ilmenite mining operations include:

Attractive major potential ilmenite deposits include:

  • The Karhujupukka magnetite-ilmenite deposit in Kolari, northern Finland with around 5 Mt reserves and ore containing about 6.2% titanium.
  • The Balla Balla magnetite-iron-titanium-vanadium ore deposit in the Pilbara of Western Australia, which contains 456 million tonnes of cumulate ore horizon grading 45% Template:Chem, 13.7% Template:Chem and 0.64% Template:Chem, one of the richest magnetite-ilmenite ore bodies in Australia[44]
  • The Coburn, WIM 50, Douglas, Pooncarie mineral sands deposits in Australia.
  • The Magpie titano-magnetite (iron-titanium-vanadium-chrome) deposits in eastern Quebec of Canada with about 1 billion tonnes containing about 43% Fe, 12% TiO2, 0.4% V2O5, and 2.2% Cr2O3.
  • The Longnose deposit in Northeast Minnesota is considered to be "the largest and richest ilmenite deposit in North America."[45]

Lunar ilmenite[edit]

Ilmenite has been found in Moon rocks,[46] and is typically highly enriched in magnesium similar to the kimberlitic association. In 2005, NASA used the Hubble Space Telescope to locate potentially ilmenite-rich locations for a Moon base.[47]

References[edit]

  1. Warr, L.N. (2021). "IMA–CNMNC approved mineral symbols". Mineralogical Magazine. 85 (3): 291–320. Bibcode:2021MinM...85..291W. doi:10.1180/mgm.2021.43. S2CID 235729616.
  2. Barthelmy, David (2014). "Ilmenite Mineral Data". Mineralogy Database. Webmineral.com. Retrieved 12 February 2022.
  3. 3.0 3.1 3.2 3.3 3.4 Anthony, John W.; Bideaux, Richard A.; Bladh, Kenneth W.; Nichols, Monte C. (eds.). "Ilmenite". Handbook of Mineralogy (PDF). Chantilly, VA, USA: Mineralogical Society of America. Retrieved 12 February 2022.
  4. Template:Mindat
  5. Heinz Sibum, Volker Günther, Oskar Roidl, Fathi Habashi, Hans Uwe Wolf, "Titanium, Titanium Alloys, and Titanium Compounds" in Ullmann's Encyclopedia of Industrial Chemistry 2005, Wiley-VCH, Weinheim. doi:10.1002/14356007.a27_095
  6. "Sachtleben RDI-S" (PDF). Archived from the original (PDF) on 25 December 2018. Retrieved 25 December 2018.
  7. "Products". Mineral Commodities Ltd. Retrieved 8 August 2016.
  8. 8.0 8.1 8.2 8.3 8.4 8.5 Klein, Cornelis; Hurlbut, Cornelius S. Jr. (1993). Manual of mineralogy : (after James D. Dana) (21st ed.). New York: Wiley. pp. 380–381. ISBN 047157452X.
  9. 9.0 9.1 9.2 Sinkankas, John (1964). Mineralogy for amateurs. Princeton, N.J.: Van Nostrand. pp. 328–329. ISBN 0442276249.
  10. Nesse, William D. (2000). Introduction to mineralogy. New York: Oxford University Press. pp. 366–367. ISBN 9780195106916.
  11. Gregor, William (1791) "Beobachtungen und Versuche über den Menakanit, einen in Cornwall gefundenen magnetischen Sand" (Observations and experiments regarding menaccanite [i.e., ilmenite], a magnetic sand found in Cornwall), Chemische Annalen …, 1, pp. 40–54, 103–119.
  12. Emsley, John (2001). "Titanium". Nature's Building Blocks: An A-Z Guide to the Elements. Oxford, England, UK: Oxford University Press. ISBN 978-0-19-850340-8.
  13. Woodford, Chris (2003). Titanium. New York: Benchmark Books. p. 7. ISBN 9780761414612. Retrieved 22 February 2022.
  14. Habashi, Fathi (January 2001). "Historical Introduction to Refractory Metals". Mineral Processing and Extractive Metallurgy Review. 22 (1): 25–53. Bibcode:2001MPEMR..22...25H. doi:10.1080/08827509808962488. S2CID 100370649.
  15. Wyatt, Bruce A.; Baumgartner, Mike; Anckar, Eva; Grutter, Herman (September 2004). "Compositional classification of "kimberlitic" and "non-kimberlitic" ilmenite". Lithos. 77 (1–4): 819–840. Bibcode:2004Litho..77..819W. doi:10.1016/j.lithos.2004.04.025. S2CID 140539776.
  16. 16.0 16.1 Sasaki, Kazuhiro; Nakashima, Kazuo; Kanisawa, Satoshi (15 July 2003). "Pyrophanite and high Mn ilmenite discovered in the Cretaceous Tono pluton, NE Japan". Neues Jahrbuch für Mineralogie - Monatshefte. 2003 (7): 302–320. doi:10.1127/0028-3649/2003/2003-0302.
  17. Weibel, Rikke; Friis, Henrik (2007). "Chapter 10 Alteration of Opaque Heavy Minerals as a Reflection of the Geochemical Conditions in Depositional and Diagenetic Environments". Developments in Sedimentology. 58: 277–303. doi:10.1016/S0070-4571(07)58010-6. ISBN 9780444517531.
  18. Buddington, A. F.; Lindsley, D. H. (1 January 1964). "Iron-Titanium Oxide Minerals and Synthetic Equivalents". Journal of Petrology. 5 (2): 310–357. doi:10.1093/petrology/5.2.310.
  19. 19.0 19.1 Murphy, P.; Frick, L. (2006). "Titanium". In Kogel, J. (ed.). Industrial minerals & rocks: commodities, markets, and uses. SME. pp. 987–1003. ISBN 9780873352338. Retrieved 21 February 2022.
  20. Mücke, A.; Bhadra Chaudhuri, J.N. (February 1991). "The continuous alteration of ilmenite through pseudorutile to leucoxene". Ore Geology Reviews. 6 (1): 25–44. Bibcode:1991OGRv....6...25M. doi:10.1016/0169-1368(91)90030-B.
  21. Van Gosen, Bradley S.; Fey, David L.; Shah, Anjana K.; Verplanck, Philip L.; Hoefen, Todd M. (2014). "Deposit model for heavy-mineral sands in coastal environments". U.S. Geological Survey Scientific Investigations Report. Scientific Investigations Report. 201--5070-L. doi:10.3133/sir20105070L.
  22. Wilson, J.R.; Robins, B.; Nielsen, F.M.; Duchesne, J.C.; Vander Auwera, J. (1996). "The Bjerkreim-Sokndal Layered Intrusion, Southwest Norway". Developments in Petrology. 15: 231–255. doi:10.1016/S0167-2894(96)80009-1. hdl:2268/550. ISBN 9780444817686.
  23. Charlier, Bernard; Sakoma, Emmanuel; Sauvé, Martin; Stanaway, Kerry; Auwera, Jacqueline Vander; Duchesne, Jean-Clair (March 2008). "The Grader layered intrusion (Havre-Saint-Pierre Anorthosite, Quebec) and genesis of nelsonite and other Fe–Ti–P ores". Lithos. 101 (3–4): 359–378. Bibcode:2008Litho.101..359C. doi:10.1016/j.lithos.2007.08.004.
  24. Dawson, J.Barry; Smith, Joseph V. (February 1977). "The MARID (mica-amphibole-rutile-ilmenite-diopside) suite of xenoliths in kimberlite". Geochimica et Cosmochimica Acta. 41 (2): 309–323. Bibcode:1977GeCoA..41..309D. doi:10.1016/0016-7037(77)90239-3.
  25. Cordeiro, Pedro F.O.; Brod, José A.; Dantas, Elton L.; Barbosa, Elisa S.R. (August 2010). "Mineral chemistry, isotope geochemistry and petrogenesis of niobium-rich rocks from the Catalão I carbonatite-phoscorite complex, Central Brazil". Lithos. 118 (3–4): 223–237. Bibcode:2010Litho.118..223C. doi:10.1016/j.lithos.2010.04.007.
  26. Buddington, A. F.; Lindsley, D. H. (1 January 1964). "Iron-Titanium Oxide Minerals and Synthetic Equivalents". Journal of Petrology. 5 (2): 310–357. doi:10.1093/petrology/5.2.310.
  27. "Industry Fundamentals". Mineral Commodities Ltd. Archived from the original on 7 October 2016. Retrieved 8 August 2016.
  28. Kroll, W (1940). "The production of ductile titanium". Transactions of the Electrochemical Society. 78: 35–47. doi:10.1149/1.3071290.
  29. Seki, Ichiro (2017). "Reduction of titanium dioxide to metallic titanium by nitridization and thermal decomposition". Materials Transactions. 58 (3): 361–366. doi:10.2320/matertrans.MK201601.
  30. "Titanium Dioxide Chemical Economics Handbook".
  31. Template:Ullmann
  32. Welham, N.J. (December 1996). "A parametric study of the mechanically activated carbothermic reduction of ilmenite". Minerals Engineering. 9 (12): 1189–1200. Bibcode:1996MiEng...9.1189W. doi:10.1016/S0892-6875(96)00115-X.
  33. Pistorius, P.C. (January 2008), "Ilmenite smelting: the basics" (PDF), The Journal of the South African Institute of Mining and Metallurgy, 108
  34. "Rio Tinto, Fer et Titane - Products". Rio Tinto Group. Archived from the original on 6 May 2015. Retrieved 19 August 2012.
  35. Gasik, Michael, ed. (2013). Handbook of Ferroalloys: Theory and Technology. London: Elsevier. p. 429. ISBN 978-0-08-097753-9.
  36. Hayes, Tony (2011), Titanium Dioxide: A Shining Future Ahead (PDF), Euro Pacific Canada, p. 5, retrieved 16 August 2012[dead link]
  37. Hayes 2011, p. 5.
  38. USGS 2012 Survey, p. 174
  39. Murphy, Philip; Frick, Louise (2006). "Titanium". In Barker, James M.; Kogel, Jessica Elzea; Trivedi, Nikhil C.; Krukowski, Stanley T. (eds.). Industrial minerals & rocks : commodities, markets, and uses (7th ed.). Littleton, Colo.: Society for Mining, Metallurgy, and Exploration. pp. 990–991. ISBN 9780873352338. Retrieved 23 February 2022.
  40. Güther, V.; Sibum, H.; Roidl, O.; Habashi, F.; Wolf, H (2005). "Titanium, Titanium Alloys, and Titanium Compounds". Ullmann's Encyclopedia of Industrial Chemistry. Wiley InterScience. ISBN 978-3-527-30673-2.
  41. Hayes 2011, p. 3.
  42. "Lac Tio Mine". InfoMine. Retrieved 16 August 2012.
  43. "TiZir Limited". Mineral Deposits Limited. Archived from the original on 18 August 2012. Retrieved 16 August 2012.
  44. "Vanadium - AIMR 2011 - Australian Mines Atlas".
  45. Kraker, Dan. "Titanium Range? Breakthrough could lead to new kind of mining in NE Minn". Retrieved 31 May 2017.
  46. Bhanoo, Sindya N. (28 December 2015). "New Type of Rock Is Discovered on Moon". New York Times. Retrieved 29 December 2015.
  47. Lane, Megan (26 August 2005). "How to set up a moonbase". UK. Retrieved 4 August 2023.

Template:Titanium minerals Template:Titanium compounds Template:Ores Template:Iron compounds

Information red.svg
Scan the QR code to donate via UPI
Dear reader, We kindly request your support in maintaining the independence of Bharatpedia. As a non-profit organization, we rely heavily on small donations to sustain our operations and provide free access to reliable information to the world. We would greatly appreciate it if you could take a moment to consider donating to our cause, as it would greatly aid us in our mission. Your contribution would demonstrate the importance of reliable and trustworthy knowledge to you and the world. Thank you.

Please select an option below or scan the QR code to donate
₹150 ₹500 ₹1,000 ₹2,000 ₹5,000 ₹10,000 Other