Graduate Aptitude Test in Engineering

From Bharatpedia, an open encyclopedia


Graduate Aptitude Test in Engineering
AcronymGATE
TypeComputer-based standardized test
Developer / administratorConducted jointly by IISc and 7 IITs on behalf of the National Co-ordination Board – GATE, Department of Higher Education, Ministry of Education, Government of India.[1]
Knowledge / skills testedBachelor's degree level knowledge of the chosen engineering discipline or master's degree level knowledge of the chosen science discipline.
PurposePost-graduate engineering admissions,[2] screening for entry-level engineering jobs.[3]
Year started1983 (41 years ago) (1983)[4]
Duration3 hours[5]
Score / grade rangeMarks (unscaled) out of 100, in 0.33 point increments.
Score (scaled) out of 1000, in 1 point increments.
Score / grade validity3 years (GATE 2014 onward).
OfferedOne time every year (usually in February 1st or 2nd week).
Countries / regionsOver 1000+ centres in India, Bangladesh, Ethiopia, Nepal, Singapore, Sri Lanka, and United Arab Emirates.
LanguagesEnglish
Annual number of test takersDecrease 517,000 (2023)
Prerequisites / eligibility criteriaThird year student or graduate of Bachelor's degree (or equivalent) in engineering/ architecture or Master's degree (or equivalent) in science, computer applications can apply for gate .[6]
FeeINR ₹ 850 for Indian Female, SC, ST and Physically challenged candidates.[7]
INR ₹ 1700 for all other Indian candidates.
US $ 100 to $200 for international candidates.
Scores / grades used byVarious Indian engineering colleges offering post-graduate education,[2] several public sector Indian companies recruiting engineers,[3] etc.
Qualification rateDecrease 18% (2023)
Websitegate.iitk.ac.in// (for GATE 2023)

The Graduate Aptitude Test in Engineering (GATE) is an entrance examination conducted in India that primarily tests the comprehensive understanding of undergraduate subjects in engineering and sciences for admission into technical postgraduate programs. GATE is conducted jointly by the Indian Institute of Science and seven Indian Institutes of Technologies at Roorkee, Delhi, Guwahati, Kanpur, Kharagpur, Chennai (Madras) and Mumbai (Bombay) on behalf of the National Coordination Board – GATE, Department of Higher Education, Ministry of Education (MoE), Government of India.

The GATE score of a candidate reflects the relative performance level of a candidate. The score is used for admissions to various post-graduate education programs (e.g. Master of Engineering, Master of Technology, Master of Architecture, Doctor of Philosophy) in Indian higher education institutes, with financial assistance provided by MoE and other government agencies. GATE scores are also used by several Indian public sector undertakings for recruiting graduate engineers in entry-level positions. It is one of the most competitive examinations in India. GATE is also recognized by various institutes outside India, such as Nanyang Technological University in Singapore.[8]

Financial assistance in post-graduate programs[edit]

The GATE is used as a requirement for financial assistance (e.g. scholarships) for a number of programs, though criteria differ by admitting institution.[2] In December 2015, the University Grants Commission and MHRD announced that the scholarship for GATE-qualified master's degree students is increased by 55% from 8,000 (US$110) per month to 12,400 (US$170) per month.[9][10]

Eligibility[edit]

The following students are eligible to take GATE:[6]

  • Bachelor's degree holders in Engineering / Technology / Architecture (3 years after 10+2/ 10+2+3(ongoing)/ 10+2+4(ongoing)/ Post-B.Sc./ Post-Diploma) and those who are in the final year of such programs ( Also prefinal year of B.tech).
  • Master's degree holders in any branch of Science/Mathematics/Statistics/Computer Applications or equivalent and those who are in the final year of such programs.
  • Candidates in the second or higher year of Four-year integrated master's degree programs (Post-B.Sc.) in Engineering / Technology.
  • Candidates in the fourth or higher year of Five-year integrated master's degree programs or Dual Degree programs in Engineering / Technology.
  • Candidates with qualifications obtained through examinations conducted by professional societies recognized by UGC/AICTE (e.g. AMIE by IE(India), AMICE by the Institute of Civil Engineers (India)-ICE(I), AMIETE By IETE(India)) as equivalent to B.E./B.Tech.
  • A candidate who is currently studying in the 3rd or higher years of any undergraduate degree program OR has already completed any government approved degree program in
  • Engineering / Technology / Architecture / Science / Commerce / Arts is eligible to appear for GATE 2022 examination. Those who have completed section A or equivalent of such professional courses are also eligible.

There is no age limit criterion defined by the exam conducting authority to appear in GATE.[11]

Disciplines, structure, syllabus, and marking scheme[edit]

Disciplines[edit]

At present, GATE is conducted in the following 29 disciplines. A candidate can select any one or two of these subjects relevant to his/her discipline.[2]

From 2022, 2 new papers were introduced: GE (Geomatics Engineering) and NM (Naval Architecture and Marine Engineering).[12]

GATE Paper Code GATE Paper Code
Aerospace Engineering AE Instrumentation Engineering IN
Agricultural Engineering AG Mathematics MA
Architecture and Planning AR Mechanical Engineering ME
Biomedical BM Mining Engineering MN
Biotechnology BT Metallurgical Engineering MT
Civil Engineering CE Petroleum Engineering PE
Chemical Engineering CH Physics PH
Computer Science and Information Technology CS Production and Industrial Engineering PI
Chemistry CY Textile Engineering and Fiber Science TF
Electronics and Communication Engineering EC Engineering Sciences XE*
Electrical Engineering EE Life Sciences XL**
Environmental Science and Engineering ES Humanities and Social Sciences XH***
Ecology and Evolution EY Statistics ST[13]
Geology and Geophysics GG Geomatics Engineering GE
Naval Architecture and Marine Engineering NM

The paper sections under XE* , XL** and XH*** are defined by some dedicated codes which are mentioned in the following table-

* Engineering Sciences (XE) Paper Sections
(A and any 2 of B to H)
Code ** Life Sciences (XL) Paper Sections
(P and any 2 of Q to U)
Code Humanities and Social Sciences (XH) Paper Sections

(B1 and any 1 of C1 to C6)

Code
Engineering Mathematics (Compulsory) A Chemistry (Compulsory) P Reasoning and Comprehension (Compulsory) B1
Fluid Mechanics B Biochemistry Q Economics C1
Materials Science C Botany R English C2
Solid Mechanics D Microbiology S Linguistics C3
Thermodynamics E Zoology T Philosophy C4
Polymer Science and Engineering F Food Technology U Psychology C5
Food Technology G Sociology C6
Atmospheric and Oceanic Sciences H

Duration and examination type[edit]

The examination is of 3 hours duration, and contains a total of 65 questions worth a maximum of 100 marks. The examination for all the papers is carried out in an online Computer Based Test (CBT) mode where the candidates are shown the questions in a random sequence on a computer screen. The questions consist of some Multiple Choice Questions or MCQs (four answer options out of which only ONE is correct, which has to be chosen). Remaining questions may be of Multiple Select Questions or MSQs (four answer options out of which ONE or MORE than ONE is/are correct, hence correct options need to be chosen) and/or Numerical Answer Type questions or NATs (answer is a real number, to be entered via an on-screen keypad and computer mouse).[2]

Syllabus[edit]

Questions and marking scheme[edit]

The examination will consist of totally 65 questions, segregated as One-mark and Two-mark questions. Out of 65 questions, 10 questions will be from General Aptitude (Verbal and Numerical ability) and 55 questions will be Technical, based on the Paper chosen. The General Aptitude section will have 5 One-mark questions and 5 Two-mark questions, accounting for about 15% of total marks. The Technical section and Engineering Mathematics section will combinedly have 25 One-mark questions and 30 Two-mark questions, accounting for about 85% of total marks. Further, all the sections may have some Multiple Choice Questions or MCQs, while remaining questions may be Multiple Select Questions or MSQs and/or Numerical Answer Type questions or NATs. The examination awards negative marks for wrong MCQ answers. Usually, 1/3rd of original marks will be deducted for wrong MCQ answers (i.e. -0.33 for wrong One-mark answers and -0.66 for wrong Two-mark answers) while there are no negative marks for MSQs and NATs. Also there is NO partial credit for MSQs and NATs.

Result and test score[edit]

GATE results are usually declared about one month after the examinations are over. The results show the total marks scored by a candidate, the GATE score, the all-India rank (AIR) and the cut off marks for various categories in the candidate's paper. The score is valid for 3 years from the date of announcement of the GATE results. The score cards are issued only to qualified candidates.

Normalized GATE Score (new procedure)[edit]

Calculation of "normalized marks" for subjects held in multiple sessions (CE, CS, EC, EE and ME):

Graph showing the linear relationship between "actual marks" and "normalized marks" of a candidate, in a multiple-session subject (CE, CS, EC, EE and ME) of GATE.
Template:Overlinegt = average marks of top 0.1 % candidates in all sessions of that subject.
Mgq = mean + standard deviation, of marks of all candidates in all sessions of that subject.
Template:Overlineti = average marks of top 0.1 % candidates in the ith session of that subject.
Miq = mean + standard deviation, of marks of all candidates in the ith session of that subject.

From 2014 onward, examination for CE, CS, EC, ME and EE subjects is being held in multiple sessions. Hence, for these subjects, a suitable normalization is applied to take into account any variation in the difficulty levels of the question sets across different sessions. The normalization is done based on the fundamental assumption that "in all multi-session GATE papers, the distribution of abilities of candidates is the same across all the sessions". According to the GATE committee, this assumption is justified since "the number of candidates appearing in multi-session subjects in GATE 2014 is large and the procedure of allocation of session to candidates is random. Further it is also ensured that for the same multi-session subject, the number of candidates allotted in each session is of the same order of magnitude."

Based on the above, and considering various normalization methods, the committee arrived at the following formula for calculating the normalized marks, for CE, CS, EC, EE and ME subjects:[14]

Normalized mark (Template:Oversetij) of jth candidate in ith session, is given by


where,

Mij is the actual marks obtained by the jth candidate in the ith session,
Template:Overlinegt is the average marks of the top 0.1 % candidates in all sessions of that subject,
Mgq is the sum of mean and standard deviation of marks of all candidates in all sessions of that subject,
Template:Overlineti is the average of marks of top 0.1 % candidates in the ith session of that subject,
Miq is the sum of mean and standard deviation of marks of all candidates in the ith session of that subject.

After evaluation of the answers, normalized marks based on the above formula will be calculated using the raw (actual) marks obtained by a candidate in the CE, CS, EC, EE or ME subject. The "score" will be calculated using these normalized marks. For all other subjects (whose tests are conducted in a single session), the actual marks obtained by the candidates will be used in calculating the score.

Calculation of GATE Score for all subjects (single-session and multiple-session):

Graph showing the linear relationship between marks and score in GATE.
Mq = Qualifying marks for general category candidates.
Mt = Average marks of top 0.1 % candidates (for subjects with 10000 or more appeared candidates) or top 10 candidates (for subjects with less than 10000 appeared candidates).
Sq = 350.
St = 900.
Note: In case of multiple-session subjects (EC, CS, ME, EE and CE), "marks" considered are the "normalized marks".

From GATE 2014 onward (and year 2014-15 of the 2-year validity period of GATE 2013 score), a candidate's GATE score is computed by the following new formula.[15]

where,

S = Score (normalized) of a candidate,
M = Marks obtained by a candidate ("normalized marks" in case of multiple-session subjects CE, CS, EC, EE and ME),
Mq = Qualifying marks for general category candidates in that subject (usually 25 or μ + σ, whichever is higher),
μ = Average (i.e. arithmetic mean) of marks of all candidates in that subject,
σ = Standard deviation of marks of all candidates in that subject,
Template:Overlinet = Average marks of top 0.1 % candidates (for subjects with 10000 or more appeared candidates) or top 10 candidates (for subjects with less than 10000 appeared candidates),
St = 900 = Score assigned to Template:Overlinet,
Sq = 350 = Score assigned to Mq.
A scorecard in the Mechanical Engineering test of GATE 2015. (The candidate's photograph, signature, name, registration number, and QR code are blurred.)

Percentile:

A candidate's percentile denotes the percentage of candidates scoring lower than that particular candidate. It is calculated as:

Percentile = ( 1 - All India rank/ No. of candidates in that subject ) x 100%

Old formula[edit]

Till GATE 2012 (and year 2013-14 of the 2-year validity period of GATE 2013 score), the score was calculated using the formula:[16]

GATE score =

where,

m = Marks obtained by the candidate,
a = Average of marks of all candidates who appeared in that subject, in that year, with marks less than zero converted to zero,
S = Standard deviation of marks of all candidates who appeared in that subject, in that year, with marks less than zero converted to zero,
ag = Global average of marks of all candidates who appeared across all subjects in current and past 5 years (i.e. 2010 to 2013 for GATE 2013), with marks less than zero converted to zero,
sg = Global standard deviation of marks of all candidates who appeared across all subjects in current and past 5 years (i.e. 2010 to 2013 for GATE 2013), with marks less than zero converted to zero.

Qualifying marks[edit]

The rules for qualifying marks have varied from year to year. The qualifying marks (out of 100) are different for different subjects as well as categories.

Category Qualifying mark (out of 100)
General (GN) 25 or 25+, whichever is higher.
Other backward classes (OBC) 90% of general category's qualifying mark.
Scheduled castes (SC) and scheduled tribes (ST) 2/3 (i.e., 66.67%) of general category's qualifying mark.

Here μ is the average (i.e., arithmetic mean) of marks of all candidates in the subject (with negative marks converted to zero) and σ is the standard deviation of all marks in that subject.

Usually, the general category's qualifying mark is in the 25 to 50 range.

The Government of India implemented reservations for other backward classes in college admissions and public sector job recruitment in the year 2008. Before that, all OBC candidates were included in the "general" category. There was no separate OBC category then.

Statistics[17][18][edit]

The following line chart shows the number of candidates registered, appeared, and qualified (total of all subjects).

  Registered
  Appeared
  Qualified
Year Registered Appeared Qualified Percentage of appeared that qualified Reference(s)
2006 184,308 170,252 33,813 19.86% [17]
2007 168,917 153,822 44,387 28.86%
2008 184,672 166,027 31,694 19.09%
2009 230,341 212,130 35,273 16.63%
2010 460,541 420,596 59,853 14.23%
2011 612,568 558,480 96,239 17.23%
2012 777,134 686,614 108,526 15.81% [19]
2013 1,200,728 984,855 136,699 13.88% [20]
2014 1,033,625 889,156 149,694 16.84% [21]
2015 927,580 804,463 121,060
[13,874 general category candidates who scored above the OBC (NCL) qualifying mark, but below the general category qualifying mark, received scorecards. But they did not qualify.]
15.05% [22]
2016 971,831 818,850 135,392 16.53% [23]
2017 922,167 787,148 129,149 16.00% [24]
2018 934,461 781,854 132,245 16.91% [25]
2019 927,616 770,681 140,955 18.28%
2020 858,890 685,088 129,000* 18.80%[26]
2021 882,684 711,542 126,813 17.82% [27]
2022 845,432 597,030 112,678 18.87% [28][29]
2023 670,000* 517,000* 93,000* 18.00*% [30]

* Precise figures unavailable right now.

The following line chart shows the variation of the number of candidates appeared in the 5 subjects with the largest numbers of appeared candidates, since GATE 2010:

  Electronics and Communication Engineering (EC)
  Computer Science and Information Technology (CS)
  Mechanical Engineering (ME)
  Electrical Engineering (EE)
  Civil Engineering (CE)
  All other subjects
Year Electronics and Communication Engineering Computer Science and Information Technology Mechanical Engineering Electrical Engineering Civil Engineering Others Total Reference(s)
2010 104,291 107,086 59,338 52,246 19,406 About 72,000* About 415,000* [31][unreliable source?]
2011 137,853 136,027 81,175 72,680 29,347 About 96,000* About 553,000* [32][unreliable source?]
2012 176,944 156,780 112,320 110,125 36,156 94,289 686,614 [33]
2013 256,135 224,160 165,814 152,381 67,472 118,893 984,855 [34]
2014 216,367 155,190 185,578 141,799 90,872 99,350 889,156 [35]
2015 172,714 115,425 185,758 125,851 101,429 103,286 804,463 [22]
2016 183,152 131,803 234,727 146,293 118,147 4728 818,850
2017 152,318 108,495 197,789 125,859 119,873 82814 787,148
2018 125,870 107,893 194,496 121,383 153,078
2022 54,292 77,257 89,567 69,734 100,043 597,030 [28]

* Precise figures unavailable right now.

Gate Statistics by Years[edit]

Difficulty level[edit]

GATE, for long, has been known to test the Engineering basics in a smart way. Complaints of "lengthy" problems have been rare. But the task of mastering an entire course of Engineering (around 30 undergraduate subjects) for a three-hour test, itself gives the test a certain level of toughness. Each year, only around 15% of all appearing candidates qualify. High percentiles (more than 99th percentile, in some cases) are required to get admission in M.Tech. or M.E. degree programs in Indian Institutes of Technology and Indian Institute of Science, or get shortlisted for job interviews in Indian public sector undertakings.

Admission to post-graduate programs[edit]

Unlike undergraduate admissions in India, candidates must apply individually to each institute after the institute has published its M.Tech. notification (usually in the month of March). There is no separate counselling held. For admissions in NITs and IIITs, CCMT is held every year and the notification is released around April of each year.[40]

Some institutions specify GATE qualification as mandatory even for admission of self-financing students to postgraduate programs. GATE qualified candidates are also eligible for the award of Junior Research Fellowship in CSIR Laboratories and CSIR sponsored projects. Top rank holders in some GATE papers are entitled to apply for "Shyama Prasad Mukherjee Fellowship" awarded by CSIR. Some government organizations prescribe GATE qualification as a requirement for applying to the post of a Scientist/Engineer.

In recent years, various academicians have recognized GATE as being one of the toughest exams in its category. Some non-Indian universities like the National University of Singapore, Nanyang Technological University in Singapore and some technical universities in Germany also identify GATE score as a parameter for judging the quality of the candidates for admission into their Masters and Ph.D. programs.

Some management institutes like NITIE, Mumbai offer admission to Post Graduate Diploma in Industrial Engineering on the basis of GATE score.

Most Indian institutes do not specify cut-off marks for previous years. So there is a general confusion in terms of selecting institutes and specializations. But in the recent years IIT Kharagpur and IIT Guwahati have been specifying last year cut-off mark list. Indian Institute of Technology Delhi has a very detailed website on Post Graduate (PG) activities and admissions where students can find the relevant information on cut-off marks etc. Typically the Indian Institute of Science and Indian Institutes of Technology are the most selective followed by National Institutes of Technology and others. Also there are some state universities in India, whose standards and facilities are very much comparable to top IITs and NITs. Some of them are Jabalpur Engineering College, Jadavpur University, Delhi Technological University, Cochin University of Science and Technology (CUSAT), Andhra University College of Engineering, Osmania University,Bihar Engineering University etc. Even within the top institutes, the selection criteria varies widely across departments and programs depending on expertise areas. The Directorate of Technical Education of Maharashtra state has also started conducting CAP round from the year 2013 for GATE and non-GATE candidates in all institutes in Maharashtra that offer M.E./M.Tech. programs.

CSIR's JRF - GATE fellowship[edit]

The Council of Scientific and Industrial Research (CSIR) introduced the Junior Research Fellowship (JRF) - GATE scheme in 2002 to allow GATE-qualified engineering graduates and GPAT-qualified pharmaceutical graduates to pursue research through suitable Ph.D. programs at CSIR laboratories.[41]

Stipend and tenure:

The fellowship amount is 125,000 (US$1,800) per month plus HRA (house rent allowance). In addition, contingency grant of 120,000 (US$1,700) per annum (calculated on pro-rata basis for fraction of a year) is also provided. On completion of 2 years as JRF - GATE, the fellowship may be upgraded to SRF (Senior Research Fellowship) - GATE and stipend may be increased to 228,000 (US$3,200) per month in the subsequent years, on the basis of assessment of CSIR JRF-NET guidelines.

The total duration of the fellowship is 5 years, within which the candidate is expected to complete the Ph.D. degree.[41]

COAP[edit]

Common Offer Acceptance Portal (COAP) is an online portal that allows candidates clearing GATE to register and get call letters from various IITs and PSUs for interviews. After the declaration of GATE results, candidates must apply through COAP, as its the only platform from which you can book your seat in post graduate programs in various institutes like the IITs.

Recruitment[edit]

Public sector undertakings (PSUs) in India, for long, have had troubles conducting their recruitment processes with more than 100,000 students taking the exams for less than 1000 jobs (a selection rate of less than 1%). After sensing the exponential rise in the number of engineering graduates in India who wish to get a PSU job, the PSUs have decided that a GATE score shall be the primary criteria for initial shortlisting. This change was the primary cause for the rapid increase in applicants for GATE 2012.

Indian Oil Corporation was the first PSU which successfully tested out this system and was followed two years later by National Thermal Power Corporation, Bharat Heavy Electricals, Bharat Electronics & PowerGrid Corporation of India.

Usually these companies release their recruitment notifications right after GATE notification, indicating that candidates have to take GATE to be considered for a job in their organizations.

List of companies[edit]

Many companies have signed Memorandums of Understanding (MoUs) with the GATE organizing committee, for using the GATE score as a screening tool for recruiting engineers at entry-level positions.

The syllabus for the GATE exam and its preparation remains the same, irrespective of whether one is applying for a job at a PSU or seeking admission for post-graduation in engineering.

Changes in recent years[edit]

Year Changes Reference(s)
2009
  • The Information Technology and Computer Science tests were merged into a single Computer Science and Information Technology test (code "CS").
  • The GATE score was valid only for one year but later the GATE committee made it valid for two years in 2010.
2010
  • Pharmacy was no longer a GATE subject, with the Graduate Pharmacy Aptitude Test (conducted by the All India Council for Technical Education) as the replacement.
  • The Biotechnology section of the Engineering Sciences GATE paper had been removed and a separate Biotechnology test (code "BT") was started.
  • An additional section of General Aptitude was introduced in GATE. Ten questions carrying 15 marks make up this section of the GATE Exam.
2011
  • Based on a trouble-free pilot project in 2010, four of the GATE papers in GATE 2011 were run using computer-based online mode. The four online papers for 2011 were Aerospace Engineering (code "AE"), Geology and Geophysics (code "GG"), Mining Engineering (code "MN") and Textile Engineering and Fiber Science (code "TF").
  • GATE was held in the morning (9:00 to 12:00) session for some papers and afternoon (14:00 to 17:00) session for others. Also, the computer-based tests were held on a different date.
2012
  • Only final year students and passed-out candidates were declared eligible to take GATE. Pre-final year B.E./B.Tech. students, who were eligible till 2011, were no longer eligible.
  • The application process was made completely online. Candidates could view their responses to the ORS and also GATE Office released official solutions for GATE papers.
  • The admit card was made downloadable from the application website. Sending admit cards by post was discontinued.
  • The exam mode was changed from paper-based to "online" (i.e. computer-based) for 2 additional subjects: Agricultural Engineering (code "AG") and Architecture and Planning (code "AR").
  • The use of pencils to darken the bubbles in the answer sheet was discontinued. Candidates could use only black ink ballpoint pens for darkening of the bubbles in the answer sheet.
[55]
2013
  • Female candidates were exempted from paying the application fee.
  • Candidates were required to upload a scanned copy of photograph and signature. Print-out of the completed application form was to be mailed to the institute by post.
  • The application fee was increased from 1000 to 1200.
  • The GATE score formula was changed. Scores calculated using the old formula were effective during the year 2013–14. Scores calculated using the new formula were effective during the year 2014–15.
[56][57]
2014
  • A new subject of Ecology and Evolution (code "EY") was introduced.
  • Examinations for all 22 subjects were conducted by an online Computer-Based Test (CBT). The online examination contained some questions for which numerical answers must be keyed in by the candidate using the "virtual" (i.e. on-screen) keypad. The rest of the questions were of Multiple Choice Question (MCQ) type.
  • Female candidates were required to pay some fee for application, a change introduced due to many raising complaints about a large portion of female candidates who registered but did not appear for the exam in 2013.
  • Application fee was increased from 1200 to 1500 for general category, OBC male/other candidates, and 750 for all female candidates and SC, ST male/other candidates.
  • GATE score's validity is increased from 2 years to 3 years.
  • Examinations were held during forenoon and afternoon sessions on alternate weekends (Saturday and Sunday) between 1 February 2014 and 2 March 2014. Examination for the subjects ME, EE, EC, and CS was held in multiple sessions due to the large numbers of registered candidates.
[58][59]
2015
  • The entire application process is made online. All required documents have to be scanned and uploaded on the online application system. Candidates no longer have to send anything by post.
  • Printed (i.e. hard-copy) scorecards are no longer sent to candidates. Only a digital (i.e. soft-copy) scorecard can be downloaded by qualified candidates from the official GATE website.
[60][61][62]
2016
  • Candidates are not permitted to bring their own calculators. An online virtual (i.e. on-screen) calculator will be available during the examination.
  • The syllabus has been revised for some subjects.
  • A new subject of Petroleum Engineering (code "PE") has been introduced.
  • After completion of all test sessions, an Answer Key will be provided for candidates to check. Candidates can challenge the GATE 2016 Answer Key on a nominal fee for a specified time period.
[63]
2017
  • A New Section has been introduced in the Engineering Sciences (XE) Paper. This section is the Atmospheric and Oceanic Sciences (section H).
  • International students from countries namely Bangladesh, Nepal, Sri Lanka, Ethiopia and United Arab Emirates are now eligible to apply for GATE 2017.
[64]
2018
  • While choosing the exam centers for GATE 2018, the candidates will have to select their first two choices from the same GATE zone. The third choice can be from any other GATE zone.
  • Candidates are not required to upload the scanned image of their thumb impression while filling the GATE online application.
  • GATE will be held across 200 cities in India.
  • GATE 2018 will also be held in the following international cities- Addis Ababa, Colombo, Dhaka, Kathmandu, Dubai, and Singapore.
[65][66]
2019
  • GATE 2019 introduces a new paper "Statistics" with a code of "ST".
  • Candidates who fail to apply by 21 September 2018 can still apply till 1 October 2018 by paying a late fee of 500. The late fee in the case of foreign centers is US$20.
[67]
2020
  • GATE 2020 introduces a new paper "Biomedical Engineering" with a code of "BM".
[68]
2021
  • Two new subjects - Environmental Science and Engineering (ES) and Humanities and Social Science (XS) have also been added to the GATE exam 2021.
  • Also, there will be relaxation in minimum eligibility for applying to GATE 2021 due to the Covid-19 situation. As per the announcement, candidates in their third year of undergraduate degree will be eligible for GATE 2021.
2022
  • Two new subjects - Geomatics Engineering (GE) and Naval Architecture and Marine Engineering (NM) have also been added to the GATE exam 2022.

Year and Organizing Institute[edit]

Each year's GATE is organized by any one of 8 institutes: IISc and 7 IITs. The overall coordination and responsibility of conducting GATE lies with this institute, which is designated as the Organizing Institute (OI) for GATE of that year. GATE coaching institutes often make speculations regarding the topics to focus upon depending upon the institute that is the OI of that year.[citation needed]

Institute GATE editions organized
Indian Institute of Science 1984, 1990, 1996, 2002, 2008, 2016, 2024.
Indian Institute of Technology, Madras 1983,[69] 1985, 1991, 1997, 2003, 2011, 2019, 2027.
Indian Institute of Technology, Delhi 1986, 1992, 1998, 2004, 2012, 2020, 2028.
Indian Institute of Technology, Bombay 1987, 1993, 1999, 2005, 2013, 2021, 2029.
Indian Institute of Technology, Kharagpur 1988, 1994, 2000, 2006, 2014, 2022, 2030.
Indian Institute of Technology, Kanpur 1989, 1995, 2001, 2007, 2015, 2023.
Indian Institute of Technology, Roorkee 2009, 2017, 2025.
Indian Institute of Technology, Guwahati 2010, 2018, 2026.

See also[edit]

Examinations[edit]

Institutes[edit]

See also[edit]

References[edit]

  1. About GATE Exam
  2. 2.0 2.1 2.2 2.3 2.4 "Gate 2021 Official Website - Information Brochure". Retrieved 29 August 2020.
  3. 3.0 3.1 Jobs after GATE
  4. https://gate.iitk.ac.in/doc/1983_IB.pdf Template:Bare URL PDF
  5. GATE Test duration
  6. 6.0 6.1 GATE Eligibility Criteria
  7. GATE Application Fee
  8. "General Admission Requirements". admissions.ntu.edu.sg. Retrieved 21 July 2016.
  9. "UGC hikes basic fellowship amount, scholarships". The Times of India. 2 December 2014. Retrieved 13 December 2014.
  10. "UGC raises scholarship amount for GATE qualified students". India Today. 3 December 2014. Retrieved 13 December 2014.
  11. "Graduate Aptitude Test in Engineering".
  12. Samantaray, Nita (29 July 2021). "GATE 2022: IIT Kharagpur to conduct exam in February, introduce 2 new papers this year". Times Now 08:48 IST. Retrieved 29 July 2021.
  13. "What is new in GATE 2019?". GATE 2019. IIT Madras.
  14. "GATE 2015 - Post Exam - GATE 2015 Score Card". GATE Office, Indian Institute of Technology, Kanpur. Retrieved 27 March 2015.
  15. GATE Score
  16. "GATE Score Formula 2012". iitb.ac.in. Retrieved 22 March 2015.
  17. 17.0 17.1 "Find key statistics on GATE exam in terms of candidate registration, % qualified". skilloutlook.com. 30 August 2022. Archived from the original on 30 August 2022. Retrieved 30 August 2022.
  18. "Discover Historical Qualifying or Pass Rate of GATE exam and other Statistics". SkillOutlook.com. 9 August 2020. Retrieved 30 August 2022.
  19. GATE (PDF). 21 March 2017 https://web.archive.org/web/20170321192930/http://www.gate.iitb.ac.in/2k12/gate2012/pdffiles/pressrelease.pdf. Archived from the original (PDF) on 21 March 2017. Retrieved 30 August 2022. {{cite web}}: Missing or empty |title= (help)
  20. "GATE 2013 Result Statistics". GATE. 28 March 2013. Archived from the original on 28 March 2013. Retrieved 30 August 2022.
  21. "GATE 2014: Only 16.84 per cent candidates qualified". India Today. 28 March 2014. Retrieved 30 August 2022.
  22. 22.0 22.1 "Press Release on GATE 2015 Results" (PDF) (Press release). GATE Office, Indian Institute of Technology, Kanpur. March 2015. Retrieved 24 March 2015.
  23. "GATE 2016 Candidate Count". Indian Institute of Science. March 2016. Retrieved 26 May 2016.
  24. "GATE 2017: Only 16% candidates qualified, numbers must improve, says chairman". Hindustan Times. 28 March 2017. Retrieved 12 August 2018.
  25. "Discover Historical Qualifying or Pass Rate of GATE exam and other Statistics". skilloutlook.com. 25 February 2022. Archived from the original on 25 February 2022. Retrieved 30 August 2022.
  26. "GATE 2020 Result: 1.3 Lakh Candidates Ace Graduate Aptitude Test in Engineering". NDTV.com. Retrieved 30 August 2022.
  27. "GATE 2021 result announced, 1.2 lakh candidates qualified - Times of India ►". The Times of India. 20 March 2021. Retrieved 16 June 2021.
  28. 28.0 28.1 "GATE2022_DATA_SR_PR_Website.pdf". Google Docs. Retrieved 5 August 2022.
  29. "GATE2022_DATA_SR_PR_Website.pdf - Google Drive". 5 August 2022. Archived from the original on 5 August 2022. Retrieved 5 August 2022.
  30. "GATE 2023 result declared; only 18% candidates qualified exam". The Indian Express. 16 March 2023. Retrieved 10 June 2023.
  31. "Number of Students Appeared in GATE 2010". All About Education - Inspirenignite.com. 28 July 2010. Retrieved 24 March 2015.
  32. "Number of Students Appeared in GATE 2011". All About Education - Inspirenignite.com. 24 July 2011. Retrieved 24 March 2015.
  33. "Press Release on GATE 2012 Results" (PDF). www.gate.iitb.ac.in/2k12/gate2012. Indian Institute of Technology, Delhi. 15 March 2012.
  34. "GATE 2013 Result Statistics". www.gate.iitb.ac.in/gate2013. Indian Institute of Technology, Bombay. 15 March 2013.
  35. "GATE 2014 Press Release" (PDF). gate.iitkgp.ac.in/gate2014. Indian Institute of Technology, Kharagpur. 27 March 2014.
  36. 36.0 36.1 36.2 36.3 36.4 36.5 GATE 2012 Press Release
  37. 37.0 37.1 37.2 37.3 37.4 37.5 37.6 37.7 37.8 37.9 "GATE 2013 Result Statistics". iitb.ac.in. Retrieved 22 March 2015.
  38. 38.0 38.1 38.2 38.3 38.4 "GATE 2014" (PDF). Archived from the original (PDF) on 29 March 2014. Retrieved 29 March 2014.
  39. 39.0 39.1 39.2 "Press Release on GATE-2015 Results" (PDF) (Press release). GATE Office, Indian Institute of Technology, Kanpur. March 2015. Retrieved 27 March 2015.
  40. "Graduate Aptitude Test in Engineering". examfiverr.com. 9 March 2020. Retrieved 9 March 2020.
  41. 41.0 41.1 GATE Fellowship
  42. "CURRENT OPENINGS". Bharat Petroleum Corporation Limited. Retrieved 23 September 2017.
  43. "RECRUITMENT OF OFFICERS THROUGH GATE 2018" (PDF). Hindustan Petroleum Corporation Limited. Retrieved 23 September 2017.
  44. "Recruitment of Engineers/ Officers / Assistant Officer (Quality Control) through GATE - 2018" (PDF). Indian Oil Corporation Limited. Retrieved 23 September 2017.
  45. "Indian Oil Corporation Limited Recruitment of Graduate Engineers through GATE - 2018 Frequently asked questions" (PDF). Indian Oil Corporation Limited. Retrieved 23 September 2017.
  46. "NHPC's advertisement regarding recruitment of Trainee Engineers (Electrical) via GATE 2015" (PDF). National Hydroelectric Power Corporation Limited. Retrieved 25 September 2014.
  47. "Power Grid's detailed notice regarding recruitment of Executive Trainees (23rd batch)" (PDF). Power Grid Corporation of India Limited. Retrieved 23 September 2017.
  48. "Mazagon Dock's detailed advertisement for recruitment of Executive Trainees (technical) via GATE 2018" (PDF). Mazagon Dock Limited. Retrieved 23 September 2017.
  49. "GSECL's detailed advertisement regarding recruitment of Vidyut Sahayak Junior Engineers via GATE 2015" (PDF). Gujarat State Electricity Corporation Limited. Retrieved 25 September 2015.
  50. "ONGC advertisement about recruitment through GATE 2018" (PDF). Oil and Natural Gas Corporation Ltd. Retrieved 23 September 2017.
  51. "RECRUITMENT SYSTEM in NTPC".
  52. "Important Update on Recruitment of Executive Trainee through GATE-2017".
  53. "NHAI advertisement about recruitment through GATE 2018" (PDF). National Highway Authority of India. Retrieved 7 December 2017.
  54. "Welcome to WBSEDCL". www.wbsedcl.in. Retrieved 3 May 2022.
  55. "GATE 2012 - Graduate Aptitude Test in Engineering". iitb.ac.in. Retrieved 22 March 2015.
  56. "GATE 2013". iitb.ac.in. Retrieved 22 March 2015.
  57. "Post-Exam Related Information". iitb.ac.in. Retrieved 22 March 2015.
  58. GATE 2014
  59. "GATE Score Card Validity". 26 March 2020.
  60. "IIT GATE 2015". iitk.ac.in. Archived from the original on 16 March 2015. Retrieved 22 March 2015.
  61. "GATE 2015 Press release" (PDF). Archived from the original (PDF) on 10 January 2017. Retrieved 30 August 2014.
  62. "GATE 2015 Information Brochure". GATE/JAM Office, IIT Kanpur. September 2014. Retrieved 21 September 2014.
  63. Gate 2016
  64. gate 2017
  65. GATE 2018 Brochure
  66. "Graduate Aptitude Test in Engineering - GATE". Retrieved 1 September 2017.
  67. GATE 2019
  68. "GATE Official Website, IIT Delhi". Archived from the original on 5 August 2021. Retrieved 24 September 2021.
  69. "IITM Annual Report 1982" (PDF). Retrieved 29 November 2022.

External links[edit]

Template:National Institutes of Technology

Template:Glossaries of science and engineering Template:Public Service Commissions in India

Information red.svg
Scan the QR code to donate via UPI
Dear reader, We kindly request your support in maintaining the independence of Bharatpedia. As a non-profit organization, we rely heavily on small donations to sustain our operations and provide free access to reliable information to the world. We would greatly appreciate it if you could take a moment to consider donating to our cause, as it would greatly aid us in our mission. Your contribution would demonstrate the importance of reliable and trustworthy knowledge to you and the world. Thank you.

Please select an option below or scan the QR code to donate
₹150 ₹500 ₹1,000 ₹2,000 ₹5,000 ₹10,000 Other